Aller au contenu principal
Publications
ENP Engineering Science Journal · Vol. 4 · No. 1 · pp. 31-34 · 2024

Light yield measurement of the Ce3+ activated LuAG nano-powder garnet scintillating detector

Hamza Mekki1, Lakhdar Guerbous2, Hicham BOUSBIA-SALAH3, Billel Zahra1, Allaoua Boukerika2

METBiomédical & santé

Résumé

This paper focuses on the characterization of nano-powder (NP) scintillator, specifically presenting preliminary results of the measurement of the light yield (LY) of a newly synthesized Lutetium Aluminum (LuAG) garnet phosphor NP scintillator, doped with 0.1% cerium. The scintillation light yield was measured using the comparative method. Considering the light-scattering and self-absorbing properties of powder scintillators, alpha particles from 241Am source were used for excitation instead of Gamma/X rays, while a Ce3+ activated LuAG single crystal (SC) was employed as the reference detector due to its well-established light yield. A photomultiplier tube (PMT) served as the photodetector, and signals were read out by a nuclear instrumentation chain. The results demonstrate that the newly prepared LuAG:Ce NP exhibits a light output that is approximately 90% of that of the single crystal reference. These findings highlight the promising potential of NP scintillators as a viable alternative to single crystals, especially in applications where the preference for powder scintillators is evident.

Mots-clés

LuAG scintillation detectorlight yield measurementalpha particlesnano-powder

Auteurs

  1. 1Nuclear Research Center of Birine, ALGERIA
  2. 2Nuclear Research Center of Algiers, ALGERIA
  3. 3Ecole National Polytechnique, Algiers, ALGERIA

Citer cet article

Hamza Mekki, Lakhdar Guerbous, Hicham BOUSBIA-SALAH, Billel Zahra, Allaoua Boukerika (2024) Light yield measurement of the Ce3+ activated LuAG nano-powder garnet scintillating detector. ENP Engineering Science Journal 4(1) pp. 31-34 https://doi.org/10.53907/enpesj.v4i1.222

Licence : creativecommons.org/licenses/by-nc-sa/4.0